Cover Garage Conversion ADU: The Paradise Owner’s Guide
If your Cover garage conversion ADU part has failed or is failing, we install Cover-compatible replacements and can often have the part matched, priced, and swapped in a single visit. Paradise homeowners typically pay $650 to $2,400 installed, depending on which component failed and how the garage was originally sealed.
Most people discover it the same way. A garage wall that stayed dry through two winters suddenly smells like damp cardboard in February. A door that shut cleanly last spring now has daylight along the frame. Sometimes it’s louder than that: the wall panel that anchors the ADU’s exterior layer starts to bow, or the seal at the slab edge pulls away after a hot stretch. What usually broke first is the part, not the structure. That distinction matters, and we’ll get to it.
Key Takeaways
- Cover garage conversions are built on a specific set of wall, floor, and envelope components. The right part depends on which Cover model sits in your garage.
- Replacement cost in Paradise runs $650 to $2,400 installed, with parts and labor itemized on a written quote before work starts.
- We’re an independent installer, not a Cover representative, so we’ll tell you when a Cover part is the right call and when a quality equivalent isn’t worth the markup.
- Some of these items are safe to inspect. None are safe to install by hand on a live envelope.
Which Cover Models This Applies To

Cover builds garage conversions across a few product lines, and the components aren’t interchangeable across them. Before we quote anything, we read the model plate on your unit, measure the actual opening or panel span, and check the serial date. Cover changed fastener and seal specs at points in its production history, and a part that technically fits a 2021 unit won’t sit right in a 2019 one.
Your model plate should be somewhere on the interior frame or near the connection point where the conversion meets the house. Many Paradise homes built in newer subdivisions near the Riverwalk area have conversions installed on slab floors with a slightly different sill profile than conversions built over a raised subfloor. That difference alone can put your part in a different size class.
Here’s the OEM-vs-aftermarket decision we walk through with every Cover owner:
- OEM Cover part: Guaranteed fit for your exact production run. More expensive, correct the first time, and the only choice when your conversion is still under a manufacturer warranty.
- Quality aftermarket equivalent: Worth it when the part is a wear item and matches the load rating and seal spec exactly. Some components are simply better and cheaper from a general ADU supplier, and we’ll say so when that’s true.
- Never the right call: A part sold as “fits all Cover units” without a model or serial match. We don’t install those, and we’ll explain why it’s a risk when you ask.
Signs Your Cover Garage Conversion ADU Is Failing
Each symptom below points to a specific part. If more than one is present, the parts are likely linked and the quote should cover both.
- Damp drywall or a musty smell along the garage-to-house wall. The perimeter seal has broken down and moisture is wicking in. Cool desert nights followed by warm Paradise mornings push condensation into any gap the seal leaves open.
- Daylight visible at the frame edges. The gasket or weatherstrip has compressed past its service life. Once you can see outside the frame, air and dust are coming through.
- Rattling or a loose feel when you press the wall panel. The anchoring fastener or bracket has loosened. On older conversions, corrosion at the fastener base lets the whole panel rock slightly.
- Sticking or misaligned doors. The threshold or slider track has worn or warped. Heat expansion during a Paradise summer can add real stress to a track that’s already worn.
- Wall panel bowing or a gap at the slab edge. The wall substrate has absorbed moisture and is separating from the sill. This is the one to call on quickly, because it’s the sign that the envelope is taking on water.
Replacement Cost & What’s Included

Here’s realistic installed pricing for Paradise. Every quote is written before we pick up a tool, line item by line item, and we don’t add fees after crews arrive.
- Seal replacement (perimeter or slab edge): $650 – $950 installed
- Weatherstrip or gasket replacement: $650 – $850 installed
- Threshold or slider track replacement: $900 – $1,500 installed
- Wall panel anchoring hardware and bracket resecure: $850 – $1,300 installed
- Wall panel substrate repair and reseal: $1,400 – $2,400 installed
What drives you higher: multi-panel jobs, a part that has to be custom-cut, or damage found under the old seal once we remove it. What’s included on every job: the part, labor, a final check of the envelope before we leave, and full coverage under our 365-Day Done Right Promise. If it’s not right within that year, we come back and make it right.
DIY or Call Us?
Some of this you can safely check yourself. You can look for daylight at the frame, hold a flashlight along the slab edge, and run your hand along the perimeter to feel for a gap. You can also read the model plate and write the numbers down; that speeds up your quote.
Where DIY goes wrong on a Cover conversion: the wall panel anchors tie into the structural layer, and the perimeter seal has to bond to a clean, correctly prepped substrate or it fails again within one summer in Paradise. We’ve seen owners chase a leak in three places, reseal all three, and still have the failure come back in the same spot. The part wasn’t the problem; the prep under it was. That’s an experienced eye, not a hardware store run.
Our technicians have up to 25 years of experience with these conversions. Call us today at (833) 856-4236 and we’ll tell you which part you need before you spend anything. We’re an independent service provider, not affiliated with Cover. We also install and service Abodu and Dvele units.
FAQs

Expect a perimeter seal to hold for roughly 7 to 10 years in Southern Nevada’s climate, less if the conversion faces full afternoon sun. The wide temperature swings between cool nights and hot days are hard on any seal material. If yours has passed that range and you’re seeing damp or daylight, it’s time. Call (833) 856-4236 for a free estimate.
Sometimes, yes. A slightly compressed gasket or a loose fastener can often be resecured or reset, and we’ll tell you honestly when repair will hold. Once a seal or substrate has absorbed water, a repair won’t last a full season and replacement is the cheaper long-term call. Call (833) 856-4236 and we’ll quote both paths.
Most single-part replacements take one visit, usually half a day. Multi-panel jobs or substrate repair can run a full day, and we schedule them so we’re not rushing a seal that needs time to cure. Your written quote will state the expected duration up front.
We match it to your model plate and serial date, then order the correct OEM Cover component or an approved equivalent that matches the spec exactly. We don’t carry parts on a truck or keep stock, so your quote is sourced to your unit, not pulled off a shelf. Call (833) 856-4236 to start the match.
Every project gets shoe covers and drop cloths inside your home, pet-safe products where there’s a choice, and a photo of the clean-up before the crew leaves. Call (833) 856-4236 for your free estimate, and we’ll get the right part to your Paradise home.
Written by the team at Seedling ADU Builders Paradise, serving Paradise and nearby areas.











